Drive Silver Sport Full Reclining Wheelchair

More Information

• Drive Overhead Adjustable Anti-Theft Device
• Drive Seat Belt For Wheelchair
• CareActive Wheelchair Winter Poncho

Precaution to take while using Silver Sport Reclining Wheelchair

• Stability

  Wheelchair is designed to be safe and stable as long as center of gravity is maintained while going about normal activities. Care must be taken while performing activities that shift your center of gravity in the chair. Never reach so far that require you to shift in the seat or bend over out of the chair. When you have to reach for objects that require you to lean, be certain front casters are pointing in a forward position that extends the wheel base and will stabilize the chair.



• Ramps

  Be sure of your own capabilities, limitations and strength before attempting to go up a ramp. Correct techniques on ramp negotiation should be shown to you by a qualified professional. Assistance is recommended when going up or down inclines greater than 10 o. If you must stop on an incline, avoid sudden, abrupt movement when you resume movement. Because of backward angle of the chair, sudden abrupt movement could cause instability. Attempting to use the wheel lock brakes could result in accidental locking, tipping to one side, or cause a sudden stop. Avoid changing direction when going down an incline, as this could result in instability of tipping over.

Warning:

• Do not attempt to adjust or operate wheelchair without reading carefully all instructions in this manual. This wheelchair has not been approved as a seat that can be used within vehicles of any kind.
• Always transfer wheelchair user to a vehicle manufacturers approved seat and use safety restraints available.
• Do not operate this wheelchair on roadways, streets or any surfaces with vehicular traffic.
• Do not attempt to operate on inclines 10% or greater without proper assistance. Be sure to completely engage wheel locks when getting in and out of wheelchair or when in elevator or wheelchair lift.
• Wheelchair should be on a smooth, stable and level area with wheel locks engaged before transferring user in or out of wheelchair.
• Do not adjust foot rests any lower than 2-1/2" from floor.
• When getting in or out of wheelchair, do not stand on or apply weight to foot rests. Before reaching or leaning forward, rotate casters to front of the wheelchair engage wheel locks to help prevent wheelchair from tipping over.
• Do not lean over or apply weight to the top of wheelchair back. This can cause wheelchair to tip over.
• When trying to extend arms over back, only reach as far as your arm can extend without having to alter your seating position.
• DO NOT stand on wheelchair.
• DO NOT use wheel locks to slow your descent down an incline. Abruptly changing directions while going down an incline could cause instability or possible tipping over

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
 

Specification

Warranty

Lifetime limited warranty

Customer Reviews